|
UV-MICRO
PUCK Integrator
+ wireless sensor unit
+ UV Dose mJ/cm 2
+ available in 5 different UV-spectral areas
+ 2 display ranges for low / high energy
+ sensor unit in different shapes and sizes |
|
The UV-MICRO
PUCK Integrator is a high quality UV-measuring system used
to measure the UV-does in hard accessible areas of UV-curing units.
With its detachable wireless sensor unit it is specially practicable
to be used in narrow WEB -Presses, in Label Printing machines as well
as for UV -3D Measuring of 3D objects.
In its standard version the UV-Micro
Puck is measuring the area of: UV 230-410 nm
The UV-MICRO
PUCK Integrator is available in up to five different UV-spectral
ranges. This fact makes it possible to chose the UV-Micro Puck to
fit the required measuring situation best. After the measuring cycle
the sensor unit is connected to the hand unit for the read out of
the UV-dose in mJ/cm2. Upon read-out, the measuring value is stored
automatically in the hand unit and dcan be called up any time as long
as it is not overwritten by storing a new measuring result.
.
After read-out, the measuring value keeps also stored in the UV-sensor
unit. The sensor internal lstoring of the measuring value enables
additive measurings.
.
Reset of the sensor unit to zero is made by connecting to the base
unit and pressing the " Reset " button of the hand unit.
This is possible with the hand unit turned on or off. The display
range can be changed to read low and high UV-energy values.
.
The UV-MICRO PUCK measuirng system consists
of:
1. the hand unit with the electronics and display
2. the UV-sensor unit with sensor opening and plug.
The UV-MICRO PUCK Integrator is available
in five different UV-spectral areas:
Item 4.1.1. UV-Micro Puck,
Type 1 UV
Item 4.1.2. UV-Micro Puck, Type 2 UV-A
Item 4.1.3. UV-Micro Puck, Type 3 UV-B
Item 4.1.4. UV-Micro Puck, Type 4 UV-C
Item 4.1.5. UV-Micro Puck, Type 5 UV-V
|
230 -410 nm
315 -410 nm
280 -315 nm
230 -280 nm
350 -460 nm |
UV-Micro
Puck
While on the conveyor belt, the
UV-Sensor Unit of the UV-Micro Puck Integrator can withstand max.
230 F / 110 C up to 10 seconds. Because of uneven radiation distribution
of the UV light source and different type of construction of the measuring
devices by different manufacturers, different reading may appear under
the same measurement conditions.
Calibration:
In order to keep its full function and precision it is recommended
to have re-calibration done once per year. Re-calibration will also
be necessary after change of battery. PTB traceable calibration with
certificate
Warranty: 2 years from the date of purchase
|
Download
